Subscribe to KPM Motorsport email news for our latest news and product promotions.
KPM Motorsport have designed, tested and released a new fuel system for the BA-BF V8 , Turbo and 6cyl range of utes and sedans.
After years of fitting the in tank Walbro unit and having many issues regarding , noise, vibration and intank hoses not being suitable for high octane fuels and octane boosters we decided to engineer a 100% race/ road system that works.
Complete assembly including Fuel Pump $1495Complete assembly excluding Fuel Pump $1195
Fitting extra Interstate freight extra
Reduce oil consumption and Detonation!
This is an essential component that can reduce or eliminate oil consumption & intake charge contamination through the intake system. If you've removed your intake plenum and noticed oil build-up, then you may need an Oil Breather Separator to absorb the oil and prevent its passage into the intake system.
Herrod Motorsport recommends the use of an Oil Breather Separator for all supercharged and high performance naturally aspirated applications. It is especially beneficial for vehicles used for track day events where vehicles run wide open throttle for extended periods of time.
The Twin CNC Machined Billet Aluminium Oil Breather Separators utilise an inline PCV valve and a new grommet for the right hand rocker cover & the left breather connects to the factory valve cover breather hose that feeds into the air inlet tube/throttle body assembly.
The billet component is assembled with a lower and upper housing, two screens and an oil vapour/mist filter media. The housing threads together utilising a rubber seal. This facilitates inspection of the filter media. The filter media is sandwiched between two mesh screens, which allow the oil vapour/mist to be absorbed and collected by the filter and then passed back through the lower screen.
With the aftermarket performance upgrades generating greater power, Ford standard inlet hoses were unable to meet these increases in pressure. Therefore, we introduced the Plazmaman kits on our top end performance upgrades. KPM also searched for cheaper alternatives for lower range upgrades and found Plazmaman products to be of comparable quality and finish. We have currently been using them on various vehicles with great results.
Power increases using the Plazmaman Racing Components have been easily achieved by fitting a basic engine piping kit. We have consistently been able to tune an extra 20 kilowatts by just replacing the engine piping alone.
Ask us for a quote to have a custom tune installed to compliment your engine piping upgrade kit.
Other products include intercoolers and full engine piping kits.
KPM are now stockists of the Ripshift 5 and 6 speed gear stick assemblies for BF/BA model Fords and earlier. If you haven’t felt the difference with these gear sticks, come in and we would be happy provide you with a demonstration. You’ll never miss third gear again with straight gate selection.