FUEL MODULE KITS

KPM Motorsport can now supply complete fuel system options for every BA-FG Sedan, Ute and engine options.
With our full range of match flowed EV14 injectors coupled with our 460 lph or 600 lph in tank fuel modules, KPM have covered all your fuel system needs.

We offer a total solution by supplying our modules as a kit with all components a direct replacement fit, with plug in looms, and correct pressures for your application.
If you wish we can go a step further and supply the correct fuel injector for your vehicle, power level and fuel module.
We can even go a step further and supply you the SCT Flash Tuner with correct injector scaling so you can fit all your components yourself then drive your vehicle to have it tuned.

To save confusion and allow hassle free selection we have attached a chart below to aid in the correct fuel module and injector choice for your application.

Walbro 460 Fuel Module Kit Streetfighter 1000Hp Fuel Module Kit

Suits BA-FG Sedan / Ute Suits BF MK2 Dedan / FG Sedan

INCLUDES INCLUDES

*460 Litre Per Hour Fuel Module * 600 Litre Per Hour Fuel module

*High Flow 4 Bar Fuel Pressure Regulator * High Flow 4 Bar Fuel Pressure regulator

*Easy fit patch loom / wiring *Easy fit patch loom / wiring

WALBRO BA/BF WALBRO FG Streetfighter FG

Fitted and Supplied Sedan $1160 Fitted and Supplied Sedan $1190 Fitted and Supplied Sedan $1995

Fitted and Supplied Ute $1280 Fitted and Supplied Ute $1310

BUY ON LINE PRICE- Streetfighter FG

BUY ON LNE PRICE- Walbro Fuel Module Kit

Bosch 1000/2000cc Injectors by KPM Motorsport

The Bosch EV14 is the latest in gasoline-engine fuel injectors and are the optimal solution for fulfilling the requirements of the very wide range of intake-air and fuel systems on modern vehicles sold worldwide. This includes our latest Australian Ford and Holden models.

KPM Motorsport now source this new technology injector from Bosch, developing it to a level that can be used in all high power engine and power package applications.

We carry this out in our own facilities by the process of set matching flow characteristics to be within /- 1% tolerances.

All development and testing is done by KPM using specialised equipment and then confirmed in dynamic real life situations by careful logging and data retrieval.

By utilising a KPM high flow injector of the same original type as the vehicle manufacturer (Bosch EV14) allows you to maintain best manners, integrity and characteristics from your cars computer and engine tune.

What this means is a set of injectors above OEM specification, capable of delivering the exact fuel to more than handle your extra power demand.

Every set is tested and matched for flow, meaning exact fuel is delivered to every cylinder in your engine. The results allow you the most reliable tuning with best power, smooth idle and fuel economy from your high performance engines.

The new EV 14 fuel injector not only sets new standards, but is also available in three different installation lengths. 34mm, 49mm and 61mm

This means we have been able to develop 1000cc and 2000cc exact matched sets for almost all Holden and Ford high performance applications.

KPM 1000cc sets are direct fit for all lengths.

KPM 2000cc sets require rail adaptors for varying lengths (included)

Suited to all existing fuels including:

Octane 95, 98

Race Fuels

Alcohols

E85

EV 14 types

Characteristics

Increased DFR (Dynamic Flow Range)
Slim-shape injector
Option of three lengths (3 installation lengths available)
Low weight (approx. 25 g)
Can be used for all fuels

Bosch 1000/2000 cc Injectors by KPM Motorsport

Common Applications:

FG V8 5.4, 5.0 S/C Coyote

Holden V8 LS1, LS2, L98, L76, L77, LS3

Ford 4.0 Inc Turbo Models

KPM 1000cc KPM 2000cc

Standard 49mm $109ea Standard 49mm $155ea

Suits: FG 4.0, XR6T, F6

Long 61mm $109ea Long 61mm $155ea

Suits: BA-FG V8 5.4, 5.0 S/C Coyote

BA-BF 4.0, XR6T, F6

Holden LS1 All

KPM 900cc KPM 2000cc

Compact 34mm $109ea Compact 34mm $145ea

Suits: Holden LS2, L98, L76, L77, LS3

Price includes GST

Price includes adaptor plugs

Buy online

KPM Surge Tank to Suit BA-BF –FG , XR6 & XR6 Turbo

The Preferred surge tank as used by all the leading workshops. Australian developed and built CNC item, Largest volume (1.7 litres) on open market utilising quality components. Easy bolt on and comes standard with rubber soft mounts for quiet operation. Supplied with a BOSCH 044 Motorsports fuel pump.

Suitable for sedan and ute
Australian made

Price: $1295.00 Buy Now

KF39 KPM Cold Air Intake System

This KPM Upgrade utilises a K&N High Flow air filter enclosed in a quality designed, temperature shielded Air Box.

KPM also incorporate a 100 mm mandrel bent intake tube allowing for smooth dense airflow into the engine creating power increase. You will not only gain power and under bonnet looks, but also inherit that sporty smooth induction noise when you put your foot down.

This upgrade alone creates power, but is especially suited to throttle body, exhaust and tuning upgrades.

KPM Cold Air Intake System: $990

Including, supply, fitting and dyno testing

K&N Performance Air Filter

This is an easy and affordable upgrade on your air filtering system. The K&N Air Filters are a lifetime filter that removes contaminants better than standard filters into your engine. This means that you won’t ever have to purchase another filter again, as these performance filters are fully serviceable.

Performance Air Filter: $149

KF19 KPM Ripshifter Stockists

KPM are now stockists of the Ripshift 5 and 6 speed gear stick assemblies for BF/BA model Fords and earlier. If you haven’t felt the difference with these gear sticks, come in and we would be happy provide you with a demonstration. You’ll never miss third gear again with straight gate selection.

Ripshift Gear Stick Assembly: $519

KF19 Ripshift Gear Stick Assembly Fitted: $795

Auto Transmission Upgrade/Hi Stall Converter

As you increase engine power, demands on the vehicles drive line increase dramatically. Your vehicle transmission must be able to cope with the extra power and torque delivered from your engine upgrade.

KPM can engineer your transmission to cope with whatever the level of demands and applications you want from your vehicle. We remove your transmission and completely dismantle and inspect all internal components. Our technicians then fully rebuild your transmission with upgraded performance components including Clutches, Shafts and Valve Body Shift Kits. Your transmission is then refitted to your vehicle and all necessary adjustments are performed. At KPM, we offer various levels of performance builds to cope with full race applications or just reliable street performance.

Upgrades starting from $3600

Easy 6 Months Interest Free Finance Now Available !

Diff Ratio Upgrade

Apart from increasing your engine power, changing your diff ratio will improve your 0 to 100 km times more than any other upgrade.

Changing the diff gears is like changing gears on a push bike. The lower the gear, the easier it is to accelerate from a standing start. KPM can recommend a gear ratio for your diff that will provide the best performance for your requirements. KPM can get you down the quarter mile as fast as possible or provide a balanced compromise to put some extra life into your sluggish vehicle set-up. Whatever the application, a diff ratio upgrade will definitely transform your vehicle to provide a much more responsive and enjoyable drive.